Dear ruaan, Sodium hypo ...

Published by

Dear ruaan,

Sodium hypo chloride has a  higher pH of around 8-11and water typically has a pH of 7.5-8.Calcium hypochlorite is an inorganic compound with formula Ca(ClO)2. As a mixture with lime and calcium chloride, it is marketed as chlorine powder or bleach powder for water treatment and as a bleaching agent has the potential to occur when hypochlorite is injected into a dilution stream, which is subsequently piped to the point(s) of applicationyou should be able to remove the deposits, from limited areas, with an acidic solution.For removing this hard scale use acidic water.Try equal parts of muriatic acid and water: add the acid to the water and wear eye protection and rubber gloves. If the entire is scaled over, you probably will have to drop the pH to approximately 6 and keep it there for a while. Use the brush to help loosen the deposits. In addition, you should deal with the underlying causes. Make sure that the pH is not above 7.6 and is closer to 7.2.